How To Draw The Earth Easy

Download Article

Making a model of the Earth is a fun project for learning about geography, geology, and astronomy. Pick upwards your paints and go started making the whole globe.

ane
Showtime with a large Styrofoam ball. ^[ane] You tin unremarkably find these at craft stores. If you lot can but find semicircular foam assurance, buy ii and glue them together.
- Other options include a papier-mâché airship, play dough, or fifty-fifty two cakes with blue and dark-green nutrient coloring added.
2
Trace the continents onto the ball. Draw an outline of the continents onto your ball. The easiest way to practise this is to detect a map of the globe online and print it out. Cut out the continents and record them onto your globe. Draw the outlines with a pen, and then have off the continents.
- You might demand to change the size of the printing until information technology looks correct.
Advertisement
3
Paint the land and water. Paint the continents with green or chocolate-brown paint, except for Antarctica: Antarctica is covered with water ice and snowfall year-round, then paint information technology white to distinguish it from the other continents. Paint everywhere else with blue paint to evidence the h2o. Spray paint works all-time on Styrofoam, merely you tin can use any kind of pigment, or even colored markers.^[two]
- Work over a spread-out newspaper to protect your table or floor from dripping paint.
- Paint one one-half, permit it dry out, then turn information technology over to paint the other half.
four
Add dirt mountains (optional). Make 3D mountains out of play dough or clay, then stick them onto the model.^[three] Look at a map to figure out where the mountain ranges are. Don't make them besides big, or they might fall off of your model.
- You tin use aluminum foil instead.
5
Hot glue objects onto the surface. Spice up your model with some fun toys, like miniature people, animals, or cars. Glue them onto the country using a hot glue gun.
- Kids should inquire an adult for help before using the glue gun.
6
Add clouds. Clouds will make your model extra special. Stick cotton fiber balls onto the ends of toothpicks, and fluff them upward a little to brand them look similar clouds. Stick the other stop of the toothpick into the foam and so the clouds are above the surface.
- Paint the toothpicks blue, light-green, or greyness to make them blend in a footling improve.
seven

Brandish the model. Glue the globe onto a stand or box so information technology doesn't gyre away. If yous desire to hang the globe, ask an adult to help you lot cut a pigsty in the elevation and hang it from twine.

Advertisement

one

Cut a Styrofoam brawl in half. Go a Styrofoam ball from a arts and crafts store. Cut information technology in one-half with an adult's assistance. Now you can encounter the inside of the Earth, and so you tin can show its layers.^[iv]
2

Glue a Styrofoam semicircle onto the ball. Accept the half of the ball you're not using. Cut out a section from the middle, in a semicircular shape. Gum this to the center of the half-Earth, and then there's a crash-land coming out of it. This is the inner core, a solid ball formed from the pressure of the layers around it. Color this ruddy with paint or markers.
3

Draw the outer core. Draw a large circle effectually the inner core, on the apartment one-half of the globe. This should take upwards about ⅓ to ½ the space on that surface. Colour it orange and call it the outer cadre.^[five]
4
Depict the pall. ^[6] Colour the rest of the apartment surface yellow, leaving only a tiny sliver of uncolored land at the border. Characterization this the mantle.
- The curtain is actually made upwardly the upper mantle (solid stone) and the lower mantle (liquid rock). Dissever information technology into two different shades of orange if you like.
v
Label the crust. The chaff is the surface layer of the Earth, and information technology is very thin compared to the other layers. Colour this brown or blackness. On your model, information technology will look similar a thin line around the unabridged cut surface.^[7]
- Together, the upper mantle and the crust make upwardly the lithosphere.
Advertisement

ane

Glue the model to a cream lath. Make one of the two models described above. One time you lot're finished, glue it to a large piece of foam board or cardboard.
2

Paint the lath black. Color the cream board blackness to show outer space.
3

Add the stars. You tin can utilize stick-on stars, or cover the background with glitter glue or glitter paint.
4

Make the moon. Find a golf ball or a crumpled upwards piece of newspaper, nearly ¼ the size of your Earth model. Glue information technology on the board, close to the Globe.
5
Add the planets. Crumple up another piece of paper for each of the planets. Mucilage them onto the board in this order:
- Mercury — pocket-sized, grayness
- Venus — yellow, almost Earth sized
- World (your model)
- Mars — red, about World sized
- Jupiter — orangish and white, the biggest planet
- Saturn — yellow, almost equally big as Jupiter, with rings around it
- Uranus — light blue, bigger than Globe but smaller than Saturn
- Neptune — calorie-free blueish, almost the size of Uranus
- Pluto — a tiny grey dot
6

Add the lord's day. Closest to Mercury, the lord's day is an enormous yellow-orange ball. The sun is much too big for you to bear witness its size accurately. You tin either brand the biggest brawl you can fit, or just colour a corner of the board yellowish to point that the sun expands far beyond the edges.

Advertizement

Add New Question

Question

How can I make an like shooting fish in a barrel and attractive model of Earth that displays its dissimilar layers?

Make a layered model with clay.
Question

How can I go far without using a ball?

You could try using dirt or Play-Doh and mold it into a ball shape.
Question

How do I brand a stand up to concord my model?

Styrofoam is very light, and you can hands poke a hole in it with a wooden stick.
Question

What can I use instead of a Styrofoam ball?

Use a small ball such as a baseball game.
Question

What are the layers of the atmosphere called?

The troposphere is the layer closest to the Earth. Later on that, it'due south the stratosphere (the part with the ozone layer), the mesosphere, the thermosphere and the exosphere. The edge of space is defined every bit being 100km to a higher place sea level, then the exosphere is technically in outer space.
Question

Tin can I cut a section out of a foam ball and pigment the layers of the world?

Benjamin Gurvis

Community Answer

Yeah, you tin can! Simply brand sure that you don't destroy the ball in the process.
Question

How do I make Saturn'southward rings out of paper?

Take a thin sail of white menu stock (paper is too floppy) and cut out a big circle. Cutting the center out of the circle so that you have a doughnut shape. About 2-thirds from the inner edge, describe a black circumvolve. This is Cassini'southward Partition, a gap in the rings. Then, depict white and yellowish circles on the rest of the card to model the rest of the rings.

Ask a Question

200 characters left

Include your email accost to go a message when this question is answered.

Submit

Advertizement

Video

If the ball won't stay on the stand up, cut off Antarctica to make a flat surface to stand on.

Thank you for submitting a tip for review!

Advertising

Ask an adult for help before cutting anything or using hot glue.

Things You'll Demand

Styrofoam ball
Colored paints or markers
Hot mucilage gun
Paper
Toy people, animals, etc.
Foam lath
Knife
Stick on stars or glitter mucilage
Colored paper

About This Article

Commodity Summary X

To make a model of the Globe, find a large ball and decorate information technology to display the oceans and continents. You can find a large Styrofoam brawl in well-nigh craft stores, or papier-mache around an inflated balloon. Once you've got your ball, print out a map of Earth, cutting out the continents, and glue them onto your ball. You might need to change the size of the map before you impress it out so it matches the scale of your ball. After you lot've added all of the continents to your Earth, paint it blue and green to stand for the land and bounding main. Yous can fifty-fifty mold some mountains out of clay, play dough, or aluminum foil, to brand your planet 3D! For more tips, including how to brand a model of the earth's layers, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 166,134 times.